Water Fountain WFT6r

This water fountain has a capacity of 26 litres per hour of freshly chilled water. The unit is ideal for leisure centres, schools, factories etc. it utilizes a direct chill system avoiding the need for a chill tank. This has the further benefit of avoiding bacteriological contamination. The WFT6 has durable push button operated bubbler and glass filler faucets. It is connected to the mains water supply removing any requirement to refill the system.

  • Water Flow Control: Bubbler and glass filler are adjustable
  • Cabinet: Polished stainless steel
  • Bracket: Wall Bracket available separately
  • Refrigeration System: Non-toxic, non-flammable R134a refrigerant
  • Cooling System & Cooling Capacity: Direct chill 26 litre per hour to 10c from incoming water temperature of 20c and room temperature of 30c
  • Compressor & Condenser: 1/6 hp, power 190w, fan assisted condenser, side vented
  • Power Supply: 220/240 Volt, 50Hz
  • Dimensions & Weight: Cabinet 1015mm H, 305mm W&D. Weight 25.6 kg. Glass filter height 290mm

Installation Instructions
The WFT6 Water Fountain needs to be connected to a waste trap, via a flexible waste pipe. This water fountain is not intended for outdoor use. Water fountains should only be installed by a competent and trained technician. The connection to the water mains must comply with Water Regulations and the connection to the electricity supply must meet electrical requirements.

  1. Allow 50mm clearance all round for proper ventilation
  2. Mains water pressure: Min 1 bar, Max 2.5 bar (always install a pressure reducing valve and water block)
  3. Turn water supply on and open bubbler and glass filler to purge all air


Health-Spa Water Ltd 136 Westborough Road Westcliff-on-Sea Essex SS0 9JF

©Copyright – 2019 Health Spa Water Ltd. All Right Reserved. Powered By Safetech